What is the CADR Rating?

CADR

CADR Rating Explained

CADR, the Clean Air Delivery Rate is a metric that was developed as a way of measuring the performance of residential air purifiers. The CADR rating reflects the volume of air in CFM (cubic feet per minute) that is cleaned of particles of certain sizes.

To measure the effectiveness in removing different particle sizes, three types of particles are tested: smoke, pollen and dust.  These represent small, medium and large sized particles. Each is measured and assigned it’s own CADR score.

Benefits of CADR

The advantage of the CADR rating is that it gives the consumer a way to compare air purifiers that consider both air flow and filter efficiency.

The CADR is basically a reflection of the air flow (CFM) times the efficiency of the air filter. So, if an air filter has 200 cfm and 100% efficiency the CADR would be 200. If the air filter has 200 cfm and 75% efficiency the CADR would be 150.

The CADR is a good way to keep from being misled in marketing messages.

For example, if a filter has a very high filter efficiency but low air flow the CADR helps to balance the two.

We see this commonly from some manufacturers that use particle counters to show the high efficiency of their air purifiers when selling to customers. This method can be very compelling as the shopper sees how well the particles are removed. While this test is valid it does not factor in other important data points such as the air flow and noise level.  Therefore it does not give you a complete picture for how well the air purifier will work in their environment.

Air Filtering Standard

The CADR is the standard in the US and in 2016 China has adopted a version of the CADR to measure air purifier performance for Chinese consumers.

While we like the CADR, in our opinion there are additional factors that should be considered when comparing air purifiers. To better understand why it helps to know how this test is performed.

How CADR is Tested

  • The CADR is measured with the air purifier run on the highest fan speed. If you will not be running the air purifier on a lower fan speed then the CADR that you will realize will be lower.
  • The CADR is tested with a new, clean filter so it does not reflect the performance of the air purifier over time. A small, thin filter may test well in the CADR test but soon after show a large drop in performance. To better understand this our suggestion is to find out how much filter media is in the filters. In addition the size of the air filters will factor into the expected performance over time. A large filter with a lot of filter media will perform much better than a smaller, thinner filter. You may want to watch out if the manufacturer does not provide this information.
  • The CADR rating does not factor in noise level.
  • The CADR is not a safety test so it does not measure ozone production, motor reliability or energy usage.

Summary

The CADR rating is a good starting point in comparing air purifiers.

However, to make an informed choice we feel more information is needed.

 

Here is a short list of the areas we recommend you consider when buying an air purifier:

  • CADR Rating
  • Filters: efficiency, size and amount of filter media
  • Noise level
  • Motor quality
  • Safety – no ozone and uses no technology that could introduce contaminants

 

The CADR is managed by AHAM (Association of Home Appliance Manufacturers) and Oransi is an AHAM member.

Other articles related to air quality.

What is a HEPA filter?

5 Reasons Children Need HEPA Air Purifiers

leave a reply

Note: all links in the comments are treated as No Follow.